Need help?Do you have a question about the Haier AP48DS1ERA and is the answer not in the manual?
General| Cooling Capacity | 48000 BTU/h |
|---|---|
| Refrigerant | R410A |
| Voltage | 220-240 V |
| Phase | 1 |
| Type | Split System |
| Noise Level (Outdoor) | 58 dB |
Details CE and RoHS compliance for the air conditioner models.
Provides details on the refrigerant used (R410A) and GWP, along with handling instructions.
Guidelines for safely disposing of old units and their packaging materials.
Critical safety precautions for operation, installation, and handling of the air conditioner.
Details technical specifications and applicable ambient temperature ranges for the unit.
Identifies and explains the parts of the indoor air conditioning unit.
Identifies and explains the components of the outdoor air conditioning unit.
Details remote control functions, additional features, and battery insertion.
Guides through starting the unit, selecting modes, setting temperature, and fan speed.
Explains how to activate and the function of the sleep mode in cooling/dry and heating operations.
Details fan-only mode, timer settings, power/quiet functions, and airflow adjustments.
Tips on temperature setting, filter cleaning, and timer use for energy efficiency.
Advice on managing sunlight and airflow to reduce energy consumption.
Lists precautions like disconnecting power and avoiding water contact during maintenance.
Step-by-step guide for cleaning air filters and both indoor/outdoor units.
Procedures for after-season and before-season maintenance of the air conditioner.
Explains common sounds and visual phenomena that are not actual problems.
Addresses unit start issues, performance problems, and common operational behaviors.
Lists error codes displayed by the unit and their corresponding failures for diagnosis.
Illustrates recommended spacing and placement for the indoor and outdoor units.
Lists necessary tools and field-supplied accessories for installation.
Covers selecting the location and securely mounting the outdoor unit.
Details on choosing the indoor unit location, drilling wall holes, and fixing it.
Covers pipe connections, drain hose installation, and the vacuumizing process.
Essential notes and procedures for connecting the electrical wiring for indoor and outdoor units.
Checklist for final inspection and initial operation test after installation.
To Next Page