What to do if my Haier Air Conditioner unit fails to start?
First, verify that the power supply switch is in the ON position and that the city supply power is normal. Also, check if the earth leakage breaker is in action. If it is, immediately turn off the power supply switch and contact the sales dealer.
Why the Haier Air Conditioner cannot be restarted soon after it stops?
This issue is due to the self-protection function of the system. Please wait for three minutes before attempting to restart the unit.
What to do if air does not blow or the fan speed cannot be changed during drying with Haier Air Conditioner?
In DRY mode, when the room temperature is 2°C higher than the temperature setting, the unit will run intermittently at LO speed, regardless of the FAN setting.
Why is water or vapor generated from the outdoor Haier AS072XVERA Air Conditioner unit during heating?
This occurs during defrosting operation, specifically when the frost accumulated on the outdoor unit is being removed.
Why does my Haier AS072XVERA automatically switch into FAN mode during cooling?
To prevent frost from accumulating on the indoor unit heat exchanger, your unit may automatically switch to FAN mode temporarily. It will soon switch back to cooling mode.
Why during heating, the indoor fan is still running even the Haier AS072XVERA unit is stopped?
To dissipate excess heat, the indoor fan will continue running for a short period even after the unit has automatically stopped.
Why during operation, white fog comes out of indoor Haier Air Conditioner unit?
When in COOL or DRY mode, a thin water fog can be seen blown out of the unit. This is condensed fog because the suddenly cooled indoor air is blown out.
Why does my Haier AS072XVERA Air Conditioner smell?
The smell often comes from furniture, paint, or tobacco odors that have been absorbed by the indoor unit.
What causes the cracking sound in my Haier AS072XVERA?
This sound is typically caused by the heat expansion or contraction of the plastic components within the unit.
Important warnings and instructions for safe operation and handling of the air conditioner.
Critical warnings and cautions for user safety during operation and maintenance activities.
Specific safety precautions and guidelines to be followed during the installation process.
Critical prohibitions and warnings to prevent damage or injury to the unit and users.
Explains common sounds and visual phenomena that are not actual malfunctions.
Steps to check before calling for service when the unit fails to start.
Essential safety warnings and precautions for installing the air conditioner.
Method for cutting and expanding pipes for proper installation.
Steps for fixing the mounting plate securely to the wall.
Final checks, address verification, and trial operation procedures.
A table listing failure codes, their display, and possible reasons.
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.1 kW |
| Energy Efficiency Rating | A++ |
| Refrigerant | R32 |
| Compressor Type | Rotary |
| Dimensions (Indoor Unit) | 1083 x 335 x 233 mm |
| Dimensions (Outdoor Unit) | 860 x 650 x 310 mm |
| Power Supply | 220-240V, 50Hz |
| Operating Temperature (Cooling) | 18-43°C |
To Next Page
