To Next PageTo Next PageWhy is my Haier AS07GS1ERA Air Conditioner cooling poorly?
Poor cooling in your Haier Air Conditioner can occur due to several reasons. Check if the air filter is dirty and clean it, as it should be cleaned every 15 days. Ensure there are no obstacles blocking the air inlet and outlet. Make sure all doors and windows are closed, and use curtains to block direct sunlight. Also, consider if there are too many heat sources or people in the room.
What to do if my Haier Air Conditioner does not restart immediately?
If your Haier Air Conditioner doesn't restart immediately after being stopped, it's because there is a 3-minute delay to protect the system. This protection circuit also activates if the electric plug is pulled out and reinserted.
Why does my Haier AS07GS1ERA Air Conditioner make so much noise?
Your Haier Air Conditioner may produce swishing or gurgling noises due to refrigerant flowing in the system, especially noticeable in the first few minutes of operation. Cracking noises can occur because the casing expands or shrinks with temperature changes. However, a big noise from airflow could indicate a dirty air filter.
Why does my Haier Air Conditioner smell?
The smells from your Haier Air Conditioner are likely due to the system circulating odors from the room's air, such as smells from furniture, paint, or cigarettes.
Why does my Haier AS07GS1ERA Air Conditioner blow mist?
During COOL or DRY operation, your Haier Air Conditioner might blow out mist due to the sudden cooling of the indoor air.
Why can’t I change the fan speed in dry mode on my Haier Air Conditioner?
In DRY mode, when the room temperature is lower than the set temperature plus 2 degrees Celsius, your Haier Air Conditioner will run intermittently at LOW speed regardless of the FAN setting.
General| Brand | Haier |
|---|---|
| Model | AS07GS1ERA |
| Category | Air Conditioner |
| Language | English |
Guides on unit start, mode selection, temp setting, and fan speed.
Guide to setting the timer for unit operation ON, OFF, or ON-OFF.
Lists necessary tools and power source requirements for installation.
Instructions for fitting the mounting plate and positioning wall holes.
How to connect pipes, cables, and securely attach the indoor unit.
Instructions for connecting cables to the indoor and outdoor units.
Details on power source installation and correct drainage setup.
Steps for cleaning and replacing air purifying filters.
Critical warnings regarding installation, including professional help and electrical safety.
Lists common phenomena and their potential causes and checks.
