Why is my Haier AS07BS4HRA making noise?
During operation, you might hear swishing or gurgling noises from your Haier Air Conditioner, especially in the first few minutes, due to refrigerant flowing. A cracking noise can occur as the casing expands or shrinks with temperature changes. However, a big noise from airflow may indicate a dirty air filter.
Why does my Haier AS07BS4HRA Air Conditioner not restart immediately?
If your Haier Air Conditioner is stopped, it will not restart immediately. There is a 3-minute delay to protect the system. If the plug is pulled out and reinserted, this protection circuit also activates for 3 minutes.
Why is my Haier Air Conditioner blowing mist?
During COOL or DRY operation, your Haier Air Conditioner might blow out mist due to sudden cooling of the indoor air.
Why can't I change the fan speed in dry mode on my Haier Air Conditioner?
In DRY mode, when the room temperature is lower than the set temperature +35.6°F, your Haier Air Conditioner will run intermittently at LOW speed, regardless of the FAN setting.
Critical safety advice for installation and use to prevent hazards.
Details on operating conditions, temperature ranges, and electrical ratings.
Mandatory precautions for power supply, wiring, and earthing.
Specific warnings and advice for safe appliance usage.
Common issues, their causes, checks, and potential solutions.
Information on EU conformity and details about the refrigerant used.
Identification and description of the indoor unit's components.
Explanation of buttons, displays, and features of the remote control.
Identification of the components of the outdoor unit.
Instructions for starting, setting temperature, and adjusting fan speed.
How to use emergency operation and test operation functions.
Guidance on adjusting vertical and horizontal air flow direction.
Detailed explanation of the sleep mode for different operating conditions.
How the unit behaves after a power interruption and restoration.
Instructions for activating and using the healthy airflow feature.
How to set and cancel timer functions, and use Turbo/Quiet/Health modes.
Instructions for safely removing and replacing batteries in the remote controller.
List of required tools, power supply needs, and included accessories.
Criteria for choosing the installation site and specifications for refrigerant pipes.
Steps for fixing the mounting plate and creating the wall opening.
Securing the indoor unit to the mounting plate and routing pipes.
Instructions for connecting the indoor and outdoor unit electrical cables.
Detailed steps for electrical wiring and ensuring proper drainage.
Table of error codes, descriptions, and diagnostic analysis.
Guidance on pipe cutting, flaring, and final installation verification.
Advice for smart usage, cleaning the unit and remote control.
Step-by-step guide for cleaning and replacing the air purifying filters.
General| Type | Split AC |
|---|---|
| Refrigerant | R32 |
| Star Rating | 3 Star |
| Noise Level (Indoor) | 38 dB |
| Cooling Capacity | 2.0 kW |
| Power Supply | 230V / 50Hz |
To Next Page
