To Next PageTo Next PageWhy is my Haier Air Conditioner not cooling well?
Poor cooling can occur due to several reasons. Check if the air filter is dirty and clean it every 15 days. Ensure there are no obstacles blocking the inlet and outlet. Verify that the temperature is set correctly. Make sure all doors and windows are closed. If there's direct sunlight, use curtains. Also, consider if there are too many heat sources or people in the room.
What to do if my Haier AS12GB2HRA doesn't restart immediately?
When the unit is stopped, it won't restart immediately until 3 minutes have elapsed. When the electric plug is pulled out and reinserted, the protection circuit will work for 3 minutes to protect the air conditioner.
Why does my Haier AS12GB2HRA blow mist?
During COOL or DRY operation, the indoor unit may blow out mist due to the sudden cooling of indoor air.
Why does my Haier AS12GB2HRA make noise?
During operation or when the unit stops, a swishing or gurgling noise might be heard, especially in the first few minutes after starting due to refrigerant flowing. A cracking noise can also occur because of the casing expanding or shrinking with temperature changes. If there's a big noise from airflow during operation, the air filter may be too dirty.
Why does my Haier AS12GB2HRA Air Conditioner smell?
The air conditioner might be circulating smells from the room, such as odors from furniture, paint, or cigarettes.
Why can't I change the fan speed in dry mode on my Haier Air Conditioner?
In DRY mode, when the room temperature becomes lower than the set temperature +2°C, the unit will run intermittently at LOW speed regardless of the FAN setting.
General| Type | Split AC |
|---|---|
| Cooling Capacity (Ton) | 1 Ton |
| Star Rating | 3 Star |
| Compressor Type | Rotary |
| Dimensions (Outdoor Unit) | 780 x 245 x 540 mm |
| Weight (Indoor Unit) | 8 kg |
| Cooling Capacity | 3.5 kW |
| Energy Efficiency Ratio (EER) | 3.5 |
| Refrigerant | R32 |
| Power Supply | 230 V, 50 Hz |
| Power Consumption (Cooling) | 1.2 kW |
General safety advice and precautions for operating the air conditioner.
Common issues, causes, and verification points for air conditioner problems.
Instructions for starting, selecting modes, setting temperature, and fan speed.
Necessary tools, power source, and accessory parts for indoor unit installation.
Guidelines for choosing the installation location and pipe selection.
Steps for fitting the mounting plate and preparing the wall hole.
