To Next PageTo Next PageWhy is my Haier AS12GS1ERA Air Conditioner cooling poorly?
Poor cooling in your Haier Air Conditioner can occur due to several reasons. Check if the air filter is dirty and clean it, as it should be cleaned every 15 days. Ensure there are no obstacles blocking the air inlet and outlet. Make sure all doors and windows are closed, and use curtains to block direct sunlight. Also, consider if there are too many heat sources or people in the room.
Why is my Haier AS12GS1ERA Air Conditioner not cooling well?
There are several reasons why your Haier Air Conditioner might not be cooling effectively. Check if the air filter is dirty and clean it, normally it should be cleaned every 15 days. Ensure there are no obstacles blocking the air inlet and outlet. Verify that the temperature is set correctly. Make sure all doors and windows are closed. Use curtains to block direct sunlight. Reduce heat sources or the number of people in the room.
What to do if my Haier Air Conditioner does not restart immediately?
If your Haier Air Conditioner doesn't restart immediately after being stopped, it's because there is a 3-minute delay to protect the system. This protection circuit also activates if the electric plug is pulled out and reinserted.
Why does my Haier AS12GS1ERA Air Conditioner not restart immediately?
If your Haier Air Conditioner doesn't restart immediately after being stopped, it's due to a built-in protection mechanism. The unit is designed to wait for 3 minutes before restarting to protect the system. This also applies if the electric plug is pulled out and reinserted; the protection circuit will activate for 3 minutes.
How to change fan speed in dry mode on Haier AS12GS1ERA Air Conditioner?
In DRY mode, the fan speed of your Haier Air Conditioner cannot be manually adjusted. When the room temperature drops below the set temperature +2°C, the unit will run intermittently at LOW speed, regardless of the fan setting.
How to fix Haier Air Conditioner not restarting immediately?
When the unit is stopped, it won't restart immediately until 3 minutes have elapsed to protect the system. When the electric plug is pulled out and reinserted, the protection circuit will work for 3 minutes to protect the air conditioner.
Why does my Haier AS12GS1ERA make so much noise?
Your Haier Air Conditioner may produce swishing or gurgling noises due to refrigerant flowing in the system, especially noticeable in the first few minutes of operation. Cracking noises can occur because the casing expands or shrinks with temperature changes. However, a big noise from airflow could indicate a dirty air filter.
Why does my Haier AS12GS1ERA smell?
The smells from your Haier Air Conditioner are likely due to the system circulating odors from the room's air, such as smells from furniture, paint, or cigarettes.
Why does my Haier AS12GS1ERA blow mist?
During COOL or DRY operation, your Haier Air Conditioner might blow out mist due to the sudden cooling of the indoor air.
Why can’t I change the fan speed in dry mode on my Haier AS12GS1ERA?
In DRY mode, when the room temperature is lower than the set temperature plus 2 degrees Celsius, your Haier Air Conditioner will run intermittently at LOW speed regardless of the FAN setting.
General| Brand | Haier |
|---|---|
| Model | AS12GS1ERA |
| Category | Air Conditioner |
| Language | English |
Details of the indoor unit, including display board and filters.
Identification of buttons and functions on the remote control.
Description of the outdoor unit components.
Steps to start the unit and choose operation modes like Cool, Heat, Dry.
How to adjust temperature settings and fan speed using the remote.
Manual adjustment of vertical and horizontal louvers for airflow control.
Activating and using sleep mode for comfortable temperature control during rest.
Utilizing power mode for rapid changes and quiet mode for reduced noise.
Setting up scheduled operation timers for the air conditioner.
Adjusting airflow direction for optimal air circulation and comfort.
Advice on proper room temperature, ventilation, and effective timer use.
Procedures for cleaning and replacing air filters for optimal performance.
Critical safety warnings regarding installation and electrical connections.
Guidelines to ensure safe operation, including handling the unit and power cord.
Common problems and their potential causes and solutions.
Ambient temperature ranges and important notes on power supply and wiring.
Steps to remove the air filters from the indoor unit.
Detailed steps for safely removing the front panel of the indoor unit.
Instructions for detaching the horizontal flap from the unit.
Steps to remove the drain pan assembly.
Procedures for removing vertical blades and the swing motor.
Steps to safely remove the electrical box.
Instructions for detaching the heat exchanger unit.
Procedures for removing the fan rotor and motor.
