To Next PageTo Next PageWhy Haier AS12GS1ERA system does not restart immediately?
When the Haier Air Conditioner is stopped, it won't restart immediately for 3 minutes to protect the system. Also, if the electric plug is pulled out and reinserted, the protection circuit will activate for 3 minutes.
Why can't I change the fan speed in dry mode on my Haier AS12GS1ERA?
In DRY mode, when the room temperature is lower than the set temperature plus 2 degrees Celsius, the Haier Air Conditioner will run intermittently at LOW speed regardless of the FAN setting.
Why is my Haier AS12GS1ERA making noise?
The swishing or gurgling noise you hear during or after operating your Haier Air Conditioner is the sound of refrigerant flowing through the system. It’s more noticeable in the first 2-3 minutes after starting the unit. However, a big noise from airflow during operation might indicate that the air filter is too dirty.
Why does my Haier AS12GS1ERA Air Conditioner make noise?
During operation, a swishing or gurgling noise may be heard, especially in the first 2-3 minutes after starting, due to refrigerant flowing in the system. A cracking noise may occur because the casing expands or shrinks due to temperature changes. If there's a big noise from air flow, the air filter may be too dirty.
General| Brand | Haier |
|---|---|
| Model | AS12GS1ERA |
| Category | Air Conditioner |
| Language | English |
Details of the indoor unit, including display board and filters.
Identification of buttons and functions on the remote control.
Description of the outdoor unit components.
Steps to start the unit and choose operation modes like Cool, Heat, Dry.
How to adjust temperature settings and fan speed using the remote.
Manual adjustment of vertical and horizontal louvers for airflow control.
Activating and using sleep mode for comfortable temperature control during rest.
Utilizing power mode for rapid changes and quiet mode for reduced noise.
Setting up scheduled operation timers for the air conditioner.
Adjusting airflow direction for optimal air circulation and comfort.
Advice on proper room temperature, ventilation, and effective timer use.
Procedures for cleaning and replacing air filters for optimal performance.
Critical safety warnings regarding installation and electrical connections.
Guidelines to ensure safe operation, including handling the unit and power cord.
Common problems and their potential causes and solutions.
Ambient temperature ranges and important notes on power supply and wiring.
Steps to remove the air filters from the indoor unit.
Detailed steps for safely removing the front panel of the indoor unit.
Instructions for detaching the horizontal flap from the unit.
Steps to remove the drain pan assembly.
Procedures for removing vertical blades and the swing motor.
Steps to safely remove the electrical box.
Instructions for detaching the heat exchanger unit.
Procedures for removing the fan rotor and motor.
