Haier AS25PBPHRA-PRE - Healthy airflow Operation; Timer On;Off Operation; Wi-Fi function description

6
EN
3.The cancel of the healthy airow function
Press button to enter additional options, press this button
continuously, the louvers location will cycle between in the
following three locations again, and then press button to
cancel.
Notice: Do not direct the ap by hand. Otherwise, the grille will run
incorrectly. If the grille is not run correctly, stop for a minute and
then start, adjusting by remote controller.
Note:
1.After setting the healthy airow function, the position grill is xed.
2.In heating, it is better to select the mode.
3.In cooling, it is better to select the mode.
4.In cooling and dry, using the air conditioner for a long time under
the high air humidity, condensate water may occur at the grille .
1.After unit starts, select your desired operation mode.
2.Press button to change TIMER mode. Every time the
button is pressed, display changes as follows:
Remote controller:
BLANK
TIMER ON TIMER OFF TIMER ON-OFF
TIMER OFF-ON
0.5h
0.5h 0.5h
0.5h
Then select your desired TIMER mode (TIMER ON or TIMER OFF
or TIMER ON-OFF). "ON"or "OFF"will ash.
3.Press
/
button to set time.
Press the button for each time, setting time in the rst 12
hours increased by 0.5 hour every time, after 12 hours,
increased by 1 hour every time.
Press the button for each time, setting time in the rst 12
hours decreased by 0.5 hour every time, after 12 hours,
decreased by 1 hour every time.
It can be adjusted within 24 hours.
4.Conrm timer setting
After adjust the time, press button and conrm the time ON
or OFF button will not ash any more.
5.Cancel timer setting
Press the button by times until the time display eliminated.
Hints:
After replacing batteries or a power failure happens, time setting
should be reset.
According to the Time setting sequence of TIMER ON or
TIMER OFF, either Start-Stop or Stop-Start can be achieved.
Timer On/O󰀨 On-O󰀨 Operation
Healthy airow Operation
1.Press to starting
Setting the comfort work conditions.
2.The setting of healthy airow function
Press button to enter additional options,Press this button
continuously, the louvers location will cycle between in the
following three locations, to choose the swing location what you
needed,and then press button to conrm.
Operation
Healthy airow
upwarder
Healthy airow
downwarde
Present
position
Wi-Fi function description
Conguration method
Scan the QR code below to download “hOn” APP. Other Download
options: Please search hOn APP on:
●App Store (IOS)
●Google Play (Android)
●Huawei AppGallery (Android)
After App Download, please register,
connect the air conditioner and enjoy using
hOn to manage your device. Please refer
to the HELP section inside the APP for more details about how to
register, connect the unit, and other operations
The application environment
Smart mobile phone and wireless router are necessary for the
application.
Wireless router must be able to connect to the Internet.
Smart mobile phone requires IOS or Android system:
IOS system
must support IOS 9.0 or above
Android system
must support Android 5.0 or above
Control
Interaction
Remind
Query
Service
APP
Cloud service
Router
Haier Smart AC
If the model has Wi-Fi function, press the “WIFI” button for 5s to
emit the Wi-Fi binding signal. Once in the binding mode, the APP
will show how to bind.
The system architecture diagram
7.This function is available for the following models

AS25PCHHRA-NR
AS35PCHHRA-NR
AS50PDHHRA-NR
AS35PBPHRA-S
AS50PDPHRA-S
AS25PBAHRA-PRO
AS35PBAHRA-PRO
AS50PDAHRA-PRO
AS71PDAHRA-PRO
AS50PDPHRA-BH
AS25PBPHRA-S
AS25PBPHRA-PRE
AS35PBPHRA-PRE
AS50PDPHRA-PRE
AS71PEPHRA-PRE
AS25PBPHRA-BH
AS35PBPHRA-BH