To Next PageTo Next PageWhy is my Haier AS25TADHRA-TH cooling poorly?
Several factors can cause poor cooling in your Haier Air Conditioner. Make sure that the air filter is clean; it should be cleaned every 15 days. Remove any obstacles blocking the inlet and outlet. Verify that the temperature is set correctly. Ensure all doors and windows are closed, and use curtains to block direct sunlight. Also, reduce the number of heat sources or people in the room.
Why is my Haier Air Conditioner making noise?
Your Haier Air Conditioner might be making noise due to several reasons. A swishing or gurgling noise, especially noticeable in the first few minutes of operation, is normal and caused by refrigerant flowing. A cracking noise during operation is also normal, resulting from the casing expanding or shrinking due to temperature changes. However, a big noise from air flow may indicate a dirty air filter, so you should clean it.
Why does my Haier AS25TADHRA-TH generate smells?
The Haier Air Conditioner may be circulating smells from the interior air, such as odors from furniture, paint, or cigarettes. To address this, ensure proper ventilation and remove any sources of odor.
What to do if my Haier Air Conditioner does not restart immediately?
If your Haier Air Conditioner doesn't restart immediately after being stopped, this is normal. To protect the system, it won't restart until 3 minutes have elapsed. Wait for 3 minutes before restarting the unit.
Why is my Haier AS25TADHRA-TH blowing out mist or steam?
If your Haier Air Conditioner blows out mist during COOL or DRY operation, it's likely due to the sudden cooling of indoor air. This is normal operation.
Why can't I change the fan speed in dry mode on my Haier Air Conditioner?
In DRY mode, when the room temperature becomes lower than the set temperature plus 2 degrees Celsius, the Haier unit will run intermittently at LOW speed regardless of the fan setting. This is normal operation.
General| Brand | Haier |
|---|---|
| Model | AS25TADHRA-TH |
| Category | Air Conditioner |
| Language | English |
Essential precautions for safe operation and storage of the air conditioner.
Process for mounting plate, wall hole prep, and piping connections.
Steps for attaching the unit and making electrical connections.
Specifics on piping work, drain installation, and electrical cable connections.
Critical safety warnings related to installation and electrical work.
Important advice and prohibitions for safe day-to-day use of the appliance.
Common issues, performance checks, and troubleshooting steps.
