O
Dehu_idi_ Mode
Air is dehumidified as it passes through air
conditioner, without being in fuji coding mode_
if room temperature is greater than 77°B fan
speed can be adjusted; otherwise fan speed is
fixed to "bw."
Fan Mode
Air is circulating throughout the room with no
coding.
N@te: Unit does not need to be vented in
Fan Mode.
P@wer ¢@nt_J
The power control turns the unit on and off:.
Mgde ¢@nt_J
There are 3 modds d Operations: "Cod" (When
unit is coding), "Dehumidify", and "Fan" (only Fan
running). A mode indicator light on the unit control
panel shows the following colors: Blue br'Cooi"
mode; Orange br"Dehumidify", and Green for
"Fan".
The unit wiJJsta4 in "Cod" made with a Blue
indicator lighL Once you press the "Mode" button
on the remote, it wiJJchange to "Dehumidi_" mode.
Pressthe,"Mode" button again to get "Fan" mode.
it goes back to the "Cad" mode once the "Mode"
buttan is pressed again°
Note: When you press "Up" and "Down" buttons
and there is no response, please press the "Mode"
button, until the unit indicator light is Blue ("Cod"),
you can, then adju4 the temperature accordingly.
o Cooling Mode,
During the cading mode the air is coded and
hot air is exhausted to the outside air through
the air exhaust hose_ Adjust fan speed and
temperature to suit your desired comfort level
N@te: The air exchange hoses must vent
outside the room when using Cod Mode.
Fan Speed ¢ont_J
The Fan Speed Contrd has 3 settings:
High, Medium and Low.
Te_p _t ¢@nt_Js
Press "Up" or "Down" to set temperature.
setting range is from 61°F to 89°F_
The
Note::When using Dehumidify or Fan Mode,
temperature setting button is invalid.
Fahrenhei_i Celsius SeJec_or
Pressthe °C / °F switch button, to switch between
°Fand °C.
Note: initial setting is °F_
Ti_er S÷_ing ¢ont_J
®When you use the timer setting button while the
unit is operating, you can preset a time for the
unit to turn off.
• When you use the timer setting button while the
unit is on standby, you can, present a time for
the unit to turn on_
Jfyou press the '_ONiOFF" button, the preset
timer function wiJJbe cancelled.
®Timer se_ing range is 1~24 hours.
Ti_er Cancel Contain
o You,can cancel the timer setting at any time by
pressing the "Cancel _ button_
8
9
To Next Page
Loading...
