WARNING!
Maintenance / cleaning
Ź If the electrical cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to prevent danger.
Do not attempt to repair, disassemble or modify the appliance by yourself.
If it requires repair, contact our customer service.
Eliminate dust from the back of the unit at least once a year to prevent a fire
hazard and increased energy consumption.
Do not spray or flush the appliance during cleaning.
Do not use sprays of water or steam to clean the appliance.
Do not clean cold glass shelves with hot water; a sudden temperature
change may cause the glass to break.
Refrigerant gas information
The appliance contains the flammable refrigerant gas ISOBUTANE (R600a).
Make sure the refrigerant circuit is not
damaged during transportation or
installation. Leaking refrigerant may cause eye injuries or ignite. If damage occurs,
keep away from open flame, ventilate the room thoroughly, and do not plug in or
unplug the power cords of the appliance or any other appliance. Notify our
customer service.
If refrigerant gas comes into contact with the eyes, rinse immediately under
running water and call an eye specialist immediately.
Take care to avoid causing a fire by igniting flammable material.
WARNING: When positioning the appliance, ensure that the supply cord is
not trapped or damaged.
WARNING: Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the appliance.
Instructions supplied with appliances which use flammable insulation blowing
gases must shall include information regarding disposal of the appliance.
To Next Page
Loading...
Need help?
General
