EasyManua.ls Logo

Haier ESA406M - User Manual

Haier ESA406M
54 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Design may vary by model number. La conguration peut varier selon le
numéro de modèle.
El diseño puede variar conforme al
número de modelo
This user manual is to be only use for
electronic control 5000 BTU, 5200 BTU
6000 BTU, 8000 BTU 10,000 BTU and
12,000 BTU Models. - Some models
may have an additional letter after the
model number.
Ce guide d'utilisation doit être utilisé
strictement avec les modèles à
commande électronique de 5 000BTU,
5 200 BTU 6 000 BTU, 8 000 BTU,
10000 BTU et 12 000 BTU. - Sur certains
modèles, le numéro de modèle peut
être suivi d'une lettre.
Este manual del usuario es únicamente
para utilizar los controles electrónicos
modelos 5000 BTU, 5200 BTU,
6000BTU, 8000 BTU, 10,000 BTU
y12,000 BTU. Algunos de los modelos
pueden tener una letra adicional
después del número de modelo.
HWR05XCM
ESA405M
ESA406M
ESA408M
ESA410M
ESA412M
User & Care Guide
Guide d'utilisation et d'entretien
Guía de uso y cuidado
Room Air Conditioner
Climatiseur individuel
Aire acondicionado
de uso doméstico

Table of Contents

Questions and Answers

  • C
    Colleen HuffAug 14, 2025
    Why my Haier ESA406M won't turn on?
    • B
      Benjamin FrenchAug 14, 2025
      Your Haier Air Conditioner might not be starting due to several reasons: it may not be plugged into a grounded outlet, so ensure it is properly plugged in. The power supply cord may have tripped, in which case you should press the RESET button on the cord. The unit might be turned off, so use the remote control or the control panel to turn it on. Lastly, a household fuse or circuit breaker may have blown, requiring you to replace the fuse or reset the circuit breaker.
  • S
    Sean WalkerAug 18, 2025
    Why is my Haier Air Conditioner not cooling the room enough?
    • R
      ryan86Aug 18, 2025
      If your Haier Air Conditioner isn't cooling effectively, it might be because the room is too hot; allow time for it to cool down after turning on the unit. Also, the temperature control may not be set correctly, so adjust it on the control panel or remote. Finally, check for any restrictions to airflow by ensuring the air discharge area is not blocked.
  • K
    Kurt HutchinsonAug 21, 2025
    What to do if my Haier ESA406M Air Conditioner keeps turning on and off?
    • T
      tara43Aug 21, 2025
      If your Haier Air Conditioner cycles on and off frequently, consider these potential causes: * The air filter might be dirty or restricted, so try cleaning it. * The airflow could be blocked, ensure that the air discharge area is not obstructed. * The outside air temperature may be too low (below 61°F), avoid operating the unit under such conditions. * If the outside temperature is very hot, increase the FAN speed to the highest setting.
  • J
    Julie StevensAug 25, 2025
    How to fix a Haier ESA406M Air Conditioner remote that is not working?
    • J
      jessica55Aug 26, 2025
      If your Haier Air Conditioner remote isn't working, the batteries might be dead, so replace them. Also, ensure the batteries are inserted in the correct position.
  • Y
    yfreemanAug 28, 2025
    Why is my Haier Air Conditioner making the room too cold?
    • C
      Chad JohnsonAug 28, 2025
      If your Haier Air Conditioner is making the room too cold, it is likely that the temperature is set too low. Try raising the set temperature to a more comfortable level.
  • J
    Jeffrey HillAug 31, 2025
    Why is my Haier ESA406M dripping water outside?
    • P
      Philip LeeAug 31, 2025
      If your Haier Air Conditioner is dripping water outside, it's likely due to hot, humid weather. This is normal during days with high humidity.
  • T
    timothywalterSep 3, 2025
    What to do if my Haier ESA406M drips water into the house?
    • A
      Annette WebbSep 3, 2025
      If your Haier Air Conditioner drips water into your house, the unit might not be properly leveled. You should tilt the unit slightly from the front to the back. Refer to Installation section. DO NOT drill a hole in the cabinet base.
  • J
    Jennifer GravesSep 7, 2025
    What to do if my Haier Air Conditioner is freezing up?
    • C
      christopher61Sep 7, 2025
      If your Haier Air Conditioner is freezing up with ice forming on the coil, it's likely due to the outside temperature being too low (below 61°F). To defrost the coil, set the unit to FAN ONLY mode and increase the temperature setting.
  • J
    Johnny JosephSep 10, 2025
    Why is water collecting in the base of my Haier ESA406M?
    • J
      julie33Sep 10, 2025
      If water collects in the cabinet base of your Haier Air Conditioner, it's likely due to humidity draining into the base. This is normal during days with high humidity. DO NOT drill a hole in the cabinet base.

Summary

Important Safety Precautions

Operational Safety & Warnings

Tools and Parts

Location Requirements

Electrical Requirements

Unpacking the Air Conditioner

Preparing the Air Conditioner

Install Top Channel

Instructions on attaching the top channel using screws to the air conditioner.

Preparing the Window

Completing the Installation

Attach Side Curtains to Window

Attaching side curtains and frames to the window sash using screws.

Final Installation

Installing foam seal, window lock bracket, and plugging unit into power outlet.

Starting the Air Conditioner

Using the Remote Control

Normal Sounds of an Air Conditioner

Cleaning the Air Filter

Cleaning the Front Panel

Annual Maintenance

Customer Service

Troubleshooting

Limited Warranty

Haier ESA406M Specifications

General IconGeneral
Voltage115V
Noise Level (Indoor)52 dB
RefrigerantR410A
Net Weight (Indoor Unit)9 kg
Net Weight (Outdoor Unit)30 kg
Dimensions (Indoor Unit)790 x 270 x 190 mm
Dimensions (Outdoor Unit)700 x 535 x 240 mm

Related product manuals