EasyManua.ls Logo

Haier ESAQ406P - User Manual

Haier ESAQ406P
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Design may vary by model number. La conguration peut varier selon le
numéro de modèle.
El diseño puede variar conforme al
número de modelo
This user manual is to be only used
for electronic control 6,050 BTU and
8,000 BTU. - Some models may have
an additional letter after the model
number.
Ce guide d'utilisation doit être utilisé
strictement avec les modèles à
commande électronique de 6,050 BTU
y 8,000 BTU. - Sur certains modèles, le
numéro de modèle peut être suivi d'une
lettre.
Este manual del usuario es únicamente
para utilizar los controles electrónicos
modelos 6,050BTU y 8,000 BTU.
Algunos de los modelos pueden tener
una letra adicional después del número
de modelo.
ESAQ406P
ESAQ408P
User & Care Guide
Guide d'utilisation et d'entretien
Guía de uso y cuidado
Room Air Conditioner
Climatiseur individuel
Aire acondicionado
de uso doméstico

Questions and Answers

Summary

IMPORTANT SAFETY PRECAUTIONS

OPERATIONAL SAFETY & WARNINGS

LOCATION REQUIREMENTS

WINDOW INSTALLATION

Details requirements for installing the air conditioner in a window.

ELECTRICAL REQUIREMENTS

REQUIRED GROUNDING METHOD

Explains the necessary grounding method for safe operation.

POWER SUPPLY CORD SAFETY

Details the specifics and safety features of the power cord.

COMPLETING THE INSTALLATION

ATTACH SIDE CURTAINS TO WINDOW

Steps to secure the side curtains to the window frame.

STARTING THE AIR CONDITIONER

USING THE REMOTE CONTROL

REMOTE POWER AND MODE

Turning the unit on/off and selecting operational modes.

TROUBLESHOOTING

LIMITED WARRANTY

ONE YEAR LIMITED WARRANTY

Covers defects in workmanship and materials for 12 months.

Summary

IMPORTANT SAFETY PRECAUTIONS

OPERATIONAL SAFETY & WARNINGS

LOCATION REQUIREMENTS

WINDOW INSTALLATION

Details requirements for installing the air conditioner in a window.

ELECTRICAL REQUIREMENTS

REQUIRED GROUNDING METHOD

Explains the necessary grounding method for safe operation.

POWER SUPPLY CORD SAFETY

Details the specifics and safety features of the power cord.

COMPLETING THE INSTALLATION

ATTACH SIDE CURTAINS TO WINDOW

Steps to secure the side curtains to the window frame.

STARTING THE AIR CONDITIONER

USING THE REMOTE CONTROL

REMOTE POWER AND MODE

Turning the unit on/off and selecting operational modes.

TROUBLESHOOTING

LIMITED WARRANTY

ONE YEAR LIMITED WARRANTY

Covers defects in workmanship and materials for 12 months.

Overview

This document is a User & Care Guide for Haier Room Air Conditioners, specifically models ESAQ406P and ESAQ408P. It provides comprehensive instructions for installation, operation, and maintenance of these electronic control units, which are available in 6,050 BTU and 8,000 BTU capacities. Some models may have an additional letter after the model number.

Function Description:

The Haier Room Air Conditioner is designed to cool a room and aid in removing humidity. It features various operating modes including Fan, Cool, Energy Save, and Dehum. The unit can be controlled via a control panel on the unit itself or through an included remote control. A timer function allows for scheduled turn-on and turn-off, and a Sleep mode adjusts temperature for comfortable nighttime operation. The air conditioner also incorporates a filter reset feature to remind users when to clean the air filter, ensuring optimal performance and air quality.

Important Technical Specifications:

  • Models Covered: ESAQ406P, ESAQ408P
  • Control Type: Electronic control
  • BTU Capacities: 6,050 BTU and 8,000 BTU
  • Refrigerant: R410a (requires certified technicians for handling and disposal)
  • Electrical Requirements:
    • 115-Volt (103.5 min. to 126.5 max.)
    • 15-Amp time-delay grounded fuse or circuit breaker
    • Use on single outlet circuit only.
    • Equipped with a 3-prong grounding plug and a Leakage Current Detection Interrupter (LCDI) power supply cord with TEST and RESET buttons for safety.
  • Window Opening Measurements:
    • Width: 26-1/16" - 39-1/4"
    • Height: 13-3/8"
  • Air Flow: 4-Way Air Flow with directional louvers (up-down and left-right control).
  • Temperature Range: Adjustable from 61°F (16°C) to 86°F (30°C).
  • Operating Temperature (Cool Mode): Not recommended below 61°F (16°C) outside temperature to prevent evaporator coil freeze-up.
  • Compressor Delay: Built-in 3-minute delay when turning on or switching from cool to fan mode to protect the compressor.

Usage Features:

  • Operating Modes:
    • Fan: Runs only the fan at High, Med, or Quiet speed. Temperature cannot be set in this mode.
    • Cool: Cools the room. Offers High, Med, Quiet, or Auto Cool fan speeds. Temperature is adjustable.
    • Energy Save: Fan runs only when cooling is needed. The fan cycles on for 2 minutes at 10-minute intervals until the room temperature is above the set temperature, then the compressor turns back on. The fan runs for 3 minutes after the compressor shuts off.
    • Dehum: Aids in removing humidity. Cannot be used to cool the room. Compressor may stop and fan runs in Quiet speed only if the set temperature is close to ambient temperature.
  • Speed Settings: High, Med, Quiet, and Auto Cool (adjusts fan speed automatically for ideal cooling).
  • Temperature Control: Adjustable using TEMP/TIME arrow buttons on the control panel or remote. Display can switch between Fahrenheit (°F) and Celsius (°C).
  • Timer Function:
    • Timer Off: Sets the unit to turn off between 1 and 24 hours.
    • Timer On: Sets the unit to turn on between 1 and 24 hours.
    • To clear a timer program, press the TIMER button until the indicator light turns off.
  • Sleep Mode: Increases the set temperature by 2°F after 1 hour, then by another 2°F after a second hour. The unit maintains this temperature for 6 hours before stopping.
  • Remote Control: Allows for convenient operation of all functions from a distance. Requires two AAA batteries. Features include POWER, Speed (High, Med, Quiet, Auto Cool), Mode (Fan, Cool, Energy Save, Dehum), TEMP UP/DOWN, TIMER ON/OFF, F/C (Fahrenheit/Celsius), SLEEP, LOCK (disables button functionality), LIGHT (turns display off/on), and RESET (resets unit to factory settings).
  • Power Supply Cord: Equipped with an LCDI device for safety, with TEST and RESET buttons. Users are instructed to test this periodically.
  • Installation: Designed for double-hung window installation only. Not for through-the-wall sleeves or wall installation. Requires proper grounding and a specific window opening size.

Maintenance Features:

  • Air Filter Cleaning: The air filter is removable for easy cleaning. A Filter Reset light illuminates after 240 hours of operation to remind users to clean it. Cleaning can be done with a vacuum cleaner or by washing with warm water and mild detergent. It must be air-dried completely before reinstallation. Operating the unit without the filter is not recommended.
  • Front Panel Cleaning: The front panel can be cleaned with a soft cloth. Chemical cleaners, sharp instruments, or flammable fluids should not be used as they can damage the surface.
  • Troubleshooting Guide: Provides solutions for common issues such as the unit not starting, remote control not working, insufficient cooling, excessive cooling, frequent cycling, and water drips.
  • Normal Sounds: The manual describes normal operating sounds, including air movement, window vibration (if not installed correctly), pinging (water droplets on the coil, can be reduced by removing the subbase water plug, though this lowers energy efficiency), high-pitched hum (compressor), clicking (thermostat), and gurgling (refrigerant).
  • Customer Service: Haier Customer Service can be reached at 1-877-337-3639 for missing parts, damaged power supply cords, or other product issues. Dated proof of purchase, model, and serial numbers are required for warranty service.
  • Storage: Users are advised to keep the Use & Care Guide, carton, and packing material for future use when removing, storing, and reinstalling the air conditioner. The unit should be kept upright and level, and allowed to stand for 2 hours before operation after installation.

Haier ESAQ406P Specifications

General IconGeneral
BrandHaier
ModelESAQ406P
CategoryAir Conditioner
LanguageEnglish

Related product manuals