What to do if my Haier HBU-18CF03 Air Conditioner unit fails to start?
If your Haier Air Conditioner won't start, make sure the power supply switch is in the ON position. Check if the power switch is turned on.
Why air does not blow or the fan speed cannot be changed during drying in Haier HBU-18CF03 Air Conditioner?
In DRY mode, when the room temperature becomes 2°C higher than the temperature setting, the Haier Air Conditioner unit will run intermittently at LO speed regardless of FAN setting.
Why is water or vapor generated from the Haier Air Conditioner outdoor unit during heating?
When your Haier Air Conditioner is in heating mode, the water or vapor generated from the outdoor unit is due to defrosting operation. This happens when frost accumulated on the outdoor unit is removed.
Why the Haier Air Conditioner cannot be restarted soon after it stops?
If your Haier Air Conditioner doesn't restart immediately after stopping, it's due to the system's self-protection function. Please wait for three minutes before restarting.
Why during heating, indoor fan is still running even when Haier Air Conditioner unit is stopped?
When heating with your Haier Air Conditioner, the indoor fan might continue running even after the unit is stopped. This happens to get rid of excess heat; the indoor fan will continue running for a while after the unit automatically stops.
Why my Haier HBU-18CF03 Air Conditioner smells?
The smell from your Haier Air Conditioner results from smells of furniture, paint, and tobacco absorbed by the indoor unit.
Why cracking sound is heard from Haier HBU-18CF03 Air Conditioner?
The cracking sound you hear from your Haier Air Conditioner is caused by heat expansion or contraction of plastics.
Why water flowing sound is heard from Haier HBU-18CF03?
The water flowing sound you hear from your Haier Air Conditioner is the flowing sound of the refrigerant and not a malfunction.
General| Refrigerant | R410A |
|---|---|
| Capacity | 1.5 Ton |
| Cooling Capacity | 18000 BTU/hr |
| Power Supply | 220-240V, 50Hz |
| Type | Split Air Conditioner |
| Operating Temperature (Heating) | 24 °C |
Important observations relating to assembly, operation, and maintenance.
Do's and don'ts for safe operation and preventing damage.
Guidelines and warnings for proper unit installation procedures.
Visual overview of key indoor unit parts.
Step-by-step guide for cleaning air filters and inlet grills.
Instructions for post-season and pre-season unit maintenance.
Sounds and phenomena that are not actual malfunctions.
Essential checks before calling for service for startup issues.
Identifying common causes for insufficient cooling or heating.
Explains indicator light patterns for system faults.
Advice on optimal operation and settings for user comfort.
Lists necessary tools and provided accessories for installation.
Critical safety warnings and precautions for installation personnel.
Guidelines for choosing a suitable installation location and site preparation.
Detailed steps for securely installing the indoor unit.
Procedures for connecting refrigerant pipes, drainage, and electrical wiring.
Final verification steps to ensure correct installation and operation.
To Next Page
