Haier HCP-168 - User Manual

Operation Instruction
of CO
2
Incubator
Model:
HCP-80
HCP-168
HCP-258
• Please read this manual carefully before using the equipment.
• The company reserves the right to interpret the content of this manual.
• Please keep it with your you for future reference.
• Product technology or software is subject to upgrade without prior notice.
• The image in this manual does not necessarily refl ect the product appearance of the actual product.

Summary

Safety Information

Safety Labels and Symbols

Illustrates safety symbols and their meanings for user guidance.

Essential Safety Precautions

Provides critical warnings and actions to prevent hazards during operation.

Product Installation

Unpacking, Handling, and Environment

Guidance on unpacking, safe handling, and suitable installation conditions.

Gas Source Connection

Procedures for connecting the CO2 gas supply.

Main Power Supply Connection

Steps for safely connecting the incubator to the power source.

Description of Parts and Control Panel

Control Panel Interface Overview

Commissioning and Application Steps

Steps for initial setup, powering on, and basic configuration.

Initial Settings: Mode and Password

Home Page Functions and Parameter Settings

Alarm System

Alarm Types and Indications

Cleaning and Sterilization

Cleaning Procedures

Disinfection Methods and Precautions

Sterilization Operation Guide

Step-by-step guide for performing dry heat sterilization.

CO2 Concentration Calibration

Calibration Methods: Air and Numerical

Procedures for calibrating the CO2 sensor using air or numerical methods.

Periodic Maintenance

Routine Inspections and Replacements

Troubleshooting (Q&A)

Common Faults and Solutions

Answers to frequently asked questions and troubleshooting tips.

Haier HCP-168 Specifications

General

Brand	Haier
Model	HCP-168
Category	Accessories
Language	English