To Next PageTo Next Page
Need help?Do you have a question about the Haier HCP-80 and is the answer not in the manual?
Displays safety symbols and their meanings to indicate potential hazards.
Outlines critical safety measures and warnings for operating the incubator.
Details the intended uses and applications of the CO2 incubator.
Explains temperature, CO2, and humidity control ranges and accuracies.
Describes the physical components and design features of the incubator.
Lists the various alarm types and safety features integrated into the incubator.
Instructions for safely unpacking and moving the incubator unit.
Specifies the required ambient conditions for proper incubator placement.
Defines necessary clearance around the incubator for ventilation and access.
Specifics on connecting the CO2 gas storage cylinder and filter.
Steps to take before powering on and operating the incubator.
Guidelines for filling the water reservoir with appropriate water quality.
Procedure for setting up and connecting the CO2 gas supply.
Instructions for turning on the incubator's main power.
Configuration steps for language, network, time, and temperature scale.
Details various alarm conditions, their phenomena, and indications.
Explains how to mute or reset alarms and automatic restore functions.
Guidelines for cleaning external surfaces and the display screen.
Procedures for wiping/spraying disinfection and dry heat sterilization.
Procedure for calibrating the CO2 sensor using ambient air.
Method for calibrating CO2 concentration using a third-party instrument.
Technical specifications for different models of the CO2 incubator.
Displays safety symbols and their meanings to indicate potential hazards.
Outlines critical safety measures and warnings for operating the incubator.
Details the intended uses and applications of the CO2 incubator.
Explains temperature, CO2, and humidity control ranges and accuracies.
Describes the physical components and design features of the incubator.
Lists the various alarm types and safety features integrated into the incubator.
Instructions for safely unpacking and moving the incubator unit.
Specifies the required ambient conditions for proper incubator placement.
Defines necessary clearance around the incubator for ventilation and access.
Specifics on connecting the CO2 gas storage cylinder and filter.
Steps to take before powering on and operating the incubator.
Guidelines for filling the water reservoir with appropriate water quality.
Procedure for setting up and connecting the CO2 gas supply.
Instructions for turning on the incubator's main power.
Configuration steps for language, network, time, and temperature scale.
Details various alarm conditions, their phenomena, and indications.
Explains how to mute or reset alarms and automatic restore functions.
Guidelines for cleaning external surfaces and the display screen.
Procedures for wiping/spraying disinfection and dry heat sterilization.
Procedure for calibrating the CO2 sensor using ambient air.
Method for calibrating CO2 concentration using a third-party instrument.
Technical specifications for different models of the CO2 incubator.
General| Type | Remote Control |
|---|---|
| Battery Type | AAA |
| Number of Batteries | 2 |
| Display Type | LCD |
| Compatible Models | Haier Air Conditioner |
| Buttons | Multiple |
