EasyManua.ls Logo

Haier HCR7918EIMP - Special Cooling Modes

Haier HCR7918EIMP
452 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Use
GB
Super-Cool function
1. When the display screen is unlocked, press the button “G” (Super-Cool selector),
the buzzer rings once, the indicator “g” (Super-Cool function) illuminates, and then
the Super-Cool function will be turned on.
2. When the indicator “g” (Super-Cool function) illuminates, press the button “G” (Su-
per-Cool selector), the buzzer rings once, the indicator g” (Super-Cool function)
goes o, and then the Super-Cool function will be turned o.
3. After the Super-Cool function is turned on, the refrigerator will automatically turn o
the function when it reaches the set condition. If you want to exit manually, you can
press the button “G” (Super-Cool selector) to turn it o.
Indicator off
Press 1 time
Indicator on
Press 1 time
Indicator off
Notice
After setting the temperature, if there is no operation within 5 seconds, the system will
be automatically determined and save the set temperature.
16
Notice
After setting the temperature, if there is no operation within 5 seconds, the system will
be automatically determined and save the set temperature.
Adjust the temperature for Switch Zone (S-Zone)
When the display screen is unlocked, press the button “F” (Zone selector). The buzzer
rings once, the indicator “f3” (S-Zone indicator) ashes, and then here comes the tem-
perature setting mode of the S-zone.
1. Press the button “D” (Temperature adjustment button “-”) every time, the buzzer
rings once, the set temperature of the S-zone will be reduced by 1. The S-zone tem-
perature will display in the sequence of “-6°C ->-7°C->-8°C ->-9°C ->-10°C ->-11°C
->-12°C->-13°C ->-14°C ->-15°C ->-16°C ->-17°C->-18°C->5°C ->4°C ->3°C-
>2°C ->1°C ->0°C ->-1°C ->-2°C->-3°C->-4°C ->-5°C ->-6°C”.
2. Press the button “E” (Temperature adjustment button “+”) every time, the buzzer
rings once, the set temperature of the S-zone will be increased by 1. The S-zone
temperature will display in the sequence of “-6°C ->-5°C->-4°C ->-3°C ->-2°C ->-
1°C ->0°C->1°C ->2°C ->3°C ->4°C ->5°C ->-18°C ->-17°C ->-16°C ->-15°C->-
14°C ->-13°C ->-12°C ->-11°C ->-10°C->-9°C->-8°C ->-7°C ->-6°C”.
Press ‘-‘ 1 time
Press ‘+‘ 1 time

Table of Contents

Related product manuals