Use
GB
Notice
When the appliance is switched on after disconnection from the main power supply, it
may take up to 12 hours for the correct temperatures to be reached.
Empty the appliance before switching off. To switch off the appliance,pull the power cord
out off the power socket.
Lock/unlock panel
Automatic lock: When the fridge door, freezer door and S-Zone door are closed and
there is no key operation within 30 seconds, the display screen will be automatically
extinguished and locked.
▶ Manual lock: When the display screen is unlocked, press the button “N” (Panel lock se-
lector) and hold for 3 seconds, the buzzer rings once, the indicator “n” (Panel lock) il-
luminates, and the display is locked.
Hold for 3s
Indicator on
Display locked
Adjust the temperature
The indoor temperatures are inuenced by the following factors:
▶ Ambient temperature
▶ Frequency of door opening
▶ Amount of stored foods
▶ Installation of the appliance
Hold for 3s
Indicator off
Display unlocked
Open door or any button
Display lights up
14
Switch on /of the appliance
The appliance is in operation as soon as it is connected to the power supply.
When the refrigerator is rst powered on, the indicator “d” (Temperature display) illumi-
nates. The fridge temperature, S-Zone temperature and freezer temperature are auto-
matically set to 5° C, -6° C and -18° C respectively. The indicator “a” (Auto Set mode) il-
luminates.
Maybe the panel lock is active.
Sensor keys
The buttons on the control panel are sensor keys, which already respond when lightly
touched with the nger.
To Next Page
Loading...
