GB
Control panel
Before rst use
▶ Remove all packaging materials, keep them out of children`s reach and dispose
them in an environmentally friendly manner.
▶ Clean the inside and outside of the appliance with water and a mild detergent before
putting any food in it.
▶ After the appliance has been levelled and cleaned, wait for at least 2-5 hours before
connecting it to the power supply. See Section INSTALLATION.
▶ Precool the compartments at high settings before loading with food. The function
Power- Freeze helps to cool down the compartments quickly.
▶ The refrigerator temperature and freezer temperature are automatically set to 5° C
and -18° C respectively. These are the recommended settings. If desired, you can
change these temperatures manually. Please see ADJUST THE TEMPERATURE.
Control panel (HCR7918ENMP)
a
b
c1
c2
c3
n
e2
e1
d
D
E
B
A
N
C1
C2
C3
g
h
F
f1
f2
f3
Buttons:
A Auto Set mode selector
B Holiday mode selector
C1 Fruit & Vegetable function selector
C2 Quick Cool function selector
C3 0° C Fresh function selector
Indicators:
a Auto Set mode
b Holiday mode
c1 Fruit & Vegetable mode
c2 Quick Cool mode
c3 0° C Fresh mode
d Temperature display
e1 Degrees Fahrenheit
e2 Degrees Celsius
f1 Fridge indicator
f2 Freezer indicator
f3 S-Zone indicator
g Super-Cool function
h Super-Freeze function
n Panel lock
13
D Temperature adjustment button “-”
E Temperature adjustment button “+”
F Zone selector
G S
uper-Cool selector
H Super-Freeze selector
N Panel lock selector
G
H
To Next Page
Loading...
