GB
Use
Notice
Under Holiday state, the fridge temperature cannot be adjusted. If either button “D”
(Temperature adjustment button “-”) or button “E” (Temperature adjustment button
“+”) is pressed to adjust the temperature of fridge, the indicator “f1” (Fridge indicator)
will ash with a prompt sound to indicate that this operation cannot be carried out.
Before using the Holiday function, please empty the fridge to prevent food goes bad in
it. When the Holiday function is turned on, either “Auto Set” function or “Super-Cool”
function cannot be turned on at the same time.
My Zone drawer
1. When the display screen is unlocked, press the button “C” (My Zone drawer selector),
the buzzer rings once, the indicator “c1” (Fruit & Vegetable mode), the indicator “c2”
(Quick Cool mode) and the indicator “c3” (0° C Fresh mode) will light up in sequence.
2. When the indicator “c1” (Fruit & Vegetable mode) illuminates, press the button “C”
(My Zone drawer selector), the buzzer rings once, the indicator “c1” (Fruit & Vegeta-
ble mode) goes o, and then the Fruit & Vegetable function will be turned o with the
indicator “c2” (Quick Cool mode) illuminating.
3. When the indicator “c2” (Quick Cool mode) illuminates, press the button “C” (My
Zone drawer selector), the buzzer rings once, the indicator “c2” (Quick Cool mode)
goes o, and then the Quick Cool function will be turned o with the indicator “c3” (0°
C Fresh mode) illuminating.
4. When the indicator “c3” (0° C Fresh mode) illuminates, press the button “C” (My Zone
drawer selector), the buzzer rings once, the indicator “c3” (0° C Fresh mode) goes
o, and then the 0° C Fresh function will be turned o with the indicator “c1” (Fruit &
Vegetable mode) illuminating.
Press 1 time
Indicator on
Function on
Press 1 time
Indicator on
Function on
Indicator on
Function on
Notice
When the refrigerator is connect to electricity for the rst time, the Fruit & Vegetable
function is automatically turned on.
3. Under unlocked state, hold the button “B” (Holiday mode selector) for 3 seconds, the
buzzer rings once, then the projection lamp will be turned o. The projection lamp
function can likewise be turned with same operation.
5. Under unlocked state, hold the button “C” (My Zone drawer selector) for 3 seconds,
the buzzer rings once, then the handle lamp will be turned o. The handle lamp can
likewise be turned on with same operation. When the handle lamp ashes, the EPP
function is turned on.
19
To Next Page
Loading...
