Use
Notice
Switch Zone temperature can‘t be adjusted under lock state.
Adjust Switch Zone temperature
Unlock the settings by long pressing key “S” for 3
seconds.
Under unlock state, press key “M” (Compart-
ment selection) to toggle across compartments.
When indicator “B” (Switch Zone indicator) lights
up, press key “L” (Temperature control “-”) or key
“N“(Temperature control “+”) to adjust Switch
Zone compartment temperature. Value displayed
on indicator “D” decreases by 1 °C when key “L” is
pressed each time. The display ahes and turns
solid with the set temperature, then goes o
after a few seconds. Accordingly, value displayed
on indicator “D” increases by 1 °C when key “N” is
pressed each time. The display ahes and turns
solid with the set temperature, then goes o after
a few seconds. Switch Zone compartment tem-
perature can be adjusted from 5 °C to -18 °C with
1 °C incremental.
17
To Next Page
Loading...
