EasyManua.ls Logo

Haier HCW58F18EHMP - Installation: Connections and Waiting; Waiting Time Before Power Connection; Electrical Connection Safety; Ice and Water Installation Notes

Haier HCW58F18EHMP
600 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation
GB
Waiting time
To the maintenance-free lubrication oil is located in the
capsule of the compressor. This oil can get through
the closed pipe system during slanting transport. Be-
fore connecting the appliance to the power supply you
have to wait at least 2 hours so that the oil runs back
into the capsule.
2 h
WARNING!
To avoid risks a damaged power cord must be replaced by the customer service (see
warranty card).
Electrical connection
Before each connection check if:
power supply, socket and fusing are appropriate to the rating plate.
the power socket is earthed and no multi-plug or extension.
the power plug and socket are strictly according.
Connect the plug to a properly installed household socket.
Ice and Water
Your Ice and Water and Automatic ice refrigerator must be installed by a qualied plumber
or Haier trained and supported service technician as incorrect plumbing can lead to water
leaks.
Haier appliances does not accept responsibility for damage (including water damage)
caused by faulty installation or plumbing.
42

Table of Contents

Related product manuals