13
To adjust the door shelf bottle huggers: (see fig #10)
1. Grasp the hugger firmly and slide right or left until it is snug against the
items stored on the shelf.
Adjusting or removing the full-width freezer shelf:
(see fig. # 11)
1. Grasp the freezer shelf firmly and push back. Lift up slightly and pull
towards you to remove.
2. To replace the freezer shelf insert the shelf into the two rear brackets as
far as possible. Lay the front of the shelf down on the front brackets
and pull forward slightly.
Ice Cube Trays:
Your refrigerator is equipped with one cube tray.
fig. # 10
shelf bottle hugger
Freezer Features
1
2
fig. # 11
English English
To Next Page
Loading...
Need help?
General
