Condenser Tumber Dryer HDY6-1
Installation
Dimensions
a = 855 mm
b = 620 mm
c = 595 mm
Weight = 38 Kg
Packing accessories
Checklist of the accessories and materials provided with the machine:
Quantity
To ensure the dryer operating normally, attention must be paid to
the following in placement:
Ƶ The dryer must be horizontally installed. Its bottom is equipped
with adjustable base angles. Adjust these 4 angles to level before
operation;
Ƶ Check whether there is any damage to the dryer during
transportation. Any damaged dryer must not be electrified. In case
of any damage, contact your dryer supplier;
Ƶ The dryer must be kept away from flammable or detonable substances˗
Ƶ The surrounding environment must be dry and ventilated;
ƵDo not install the dryer on any hairy carpet because the normal
ventilation of the vent hole may be blocked˗
ƵTo allow the dryer to perform better, the ambient temperature shall
not be lower than 10
ć
nor higher than 35
ć
Name
Owner's
manual
Certificate of
Conformity
Drainpipe
a
b
c
-6-
To Next Page
Loading...
Need help?
General
