GB
5- Use
%HIRUHƪUVWXVH
ŕRemove all packaging materials, keep them out of children`s reach and dispose
them in an environmentally friendly manner.
ŕClean the inside and outside of the appliance with water and a mild detergent before
putting any food in it.
ŕAfter the appliance has been levelled and cleaned, wait for at least 2 hours before
connecting it to the power supply. See Section INSTALLATION.
ŕPrecool the compartments at high settings before loading with food. The function
Super-Freeze helps to cool down the freezer compartment quickly.
ŕThe refrigerator temperature and freezer temperature are automatically set to 5° C
and -18° C respectively. These are the recommended settings. If desired, you can
change these temperatures manually. Please see MANUAL ADJUSTING MODE.
11
6ZLWFKRQRƩWKHDSSOLDQFH
The appliance is in operation as soon as it is connected to the power supply.
:KHQWKHDSSOLDQFHLVSRZHUHGRQIRUWKHnjUVWWLPHWKHDFWXDOUHIULJHUDWRUDQGIUHH]HU
WHPSHUDWXUHVţDŤDQGţEŤDUHGLVSOD\HG7KHGLVSOD\ZLOOǍDVK,IWKHGRRUVDUHFORVHGLWZLOO
VZLWFKRNjDIWHUVHFRQGV0D\EHWKHSDQHOORFNLVDFWLYH
5.4 Standby-mode
7KHGLVSOD\VFUHHQWXUQVRNjDXWRPDWLFDOO\VHFRQGVDIWHUSUHVVLQJDNH\7KHGLVSOD\ZLOO
be automatically locked. It lights up automatically by touching any key or opening the door/
drawer .
5.2 Sensor keys
The buttons on the control panel are sensor keys, which already respond when lightly
WRXFKHGZLWKWKHnjQJHU
Notice: Presettings
ŕThe appliance is preset to the recommended temperature of 5°C (refrigerator) and
- 18°C (freezer). Under normal ambient condition you need not to set a temperature.
ŕThe presetting function for the My Zone drawer is 0°C Fresh.
ŕWhen the appliance is switched on after disconnection from the main power supply, it
may take up to 12 hours for the correct temperatures to be reached.
(PSW\WKHDSSOLDQFHEHIRUHVZLWFKLQJRNj7RVZLWFKRNjWKHDSSOLDQFHSXOOWKHSRZHUFRUG
RXWRNjWKHSRZHUVRFNHW
To Next Page
Loading...
