EasyManua.ls Logo

Haier HFW7819EWMP - Special Functions and Drawers; Fridge and Freezer Temperature Settings

Haier HFW7819EWMP
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
5- Use
T
Ambient temperature
Frequency of door opening
Amount of stored foods
Installation of the appliance
13
5.7.2.1 Adjust the temperature for fridge
1. Unlock the panel by touching key “F” if it is locked
(Fig. 5.5).
2. Touch key A” (ZONE) to select the fridge compart-
ment,Indicator”a”illuminates and fridge compartment
is activated(Fig. 5.7.2-1).
The actual temperature in the fridge compartment
is displayed (Fig. 5.7.2-2).
3.
Touch sequentially key +” or “-” until the desired
value of temperature is flashing(Fig. 5.7.2-3).
A signal will sound at each key touch. The tempera-
ture increases in sequences of 1°C from a minimum
of 1°C to a maximum of 9°C. The optimum tem-
perature in the fridge is 5 °C. Colder temperatures
mean unnecessary energy consumption.
4.
-
- ZONE +
5.7.2-3
5.7.2-2
5.7.2.2 Adjust the temperature for freezer
1. Unlock the panel by touching key “F” if it is locked
(Fig. 5.5).
2.
3. Touch sequentially key“b” (Freezer) until the desired
A signal will sound at each key press. The tempera-
ture increases in sequences of 1°C from -14°C to
-24°C. The optimum temperature in the freezer is
-18°C. Colder temperatures mean unnecessary en
ergy consumption.
4. Touch any key except “+” or “-” (Freezer) to confirm,
5.7.2-4
5.7.2-5
5.7.2-1
“+” and”-”
Touch key “A” (ZONE) to select the freezer compart
ment,Indicator”a”illuminates and freezer compart-
ment is activated(Fig. 5.7.2-4).
The actual temperature in the freezer compartment
is displayed (Fig. 5.7.2-5).
or the setting confirms automatically after 5seconds.
Displayed temperature stops flashing.
- ZONE +
- ZONE + - ZONE +

Related product manuals