What to do if my Haier LCD TV screen is blank?
If your Haier LCD TV screen is blank, make sure the correct signals are being input. Try pressing the INPUT button to switch the signal input to TV.
Why is there no sound on my Haier LCD TV?
If your Haier LCD TV has no sound, first, check if Mute mode is enabled by pressing the Mute button. If that's not the issue, switch to another channel to see if the problem persists. You can also try pressing the VOL+ button to increase the volume.
Why does my Haier HL26ATB LCD TV have spots with some or all pictures?
If your Haier LCD TV has spots on the picture, check if the antenna is correctly connected and in good condition. You may also need to fine-tune the channel.
Why is there no picture on some channels on my Haier LCD TV?
If your Haier LCD TV shows no picture on some channels, verify that the correct channel is selected. Also, adjust the antenna and make adjustments using Fine Tune and Manual Scan.
What causes horizontal/vertical bars or picture shaking on a Haier HL26ATB LCD TV?
If your Haier LCD TV displays horizontal or vertical bars, or the picture is shaking, check for local interference from electrical appliances or power tools.
General| Screen Size | 26 inches |
|---|---|
| Display Technology | LCD |
| Resolution | 1366 x 768 |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 800:1 |
| Brightness | 500 cd/m² |
| Response Time | 8 ms |
| Viewing Angle | 170° (H) / 160° (V) |
| Weight | 15.4 lbs |
| Input Ports | HDMI, Composite, RF |
| Sound Output | 10W (2 x 5W) |
To Next Page
