What to do if my Haier LCD TV has a blank screen?
If your Haier LCD TV screen is blank, make sure the correct signals are being input. Try pressing the INPUT button to switch the signal input to TV. If the power supply was interrupted, try restarting the television.
How to troubleshoot no sound on Haier LCD TV?
If your Haier LCD TV has no sound, first press the Mute button to check if Mute mode is enabled. If not, try switching to another channel to see if the problem persists. You can also press the VOL+ button to increase the volume and see if that resolves the issue.
What to do if my Haier LCD TV is out of control?
If your Haier LCD TV is out of control, disconnect it from the power supply. Wait for 10 seconds, and then reconnect it.
Why does my Haier LCD TV have no picture on some channels?
If your Haier LCD TV has no picture on some channels, ensure that you have selected the correct channel. You may also need to adjust the antenna or make fine-tune adjustments using the MANUAL Scan feature.
Why does my Haier LCD TV have poor sound quality?
If your Haier LCD TV has poor sound quality, verify that the sound system is set up correctly. Refer to the relevant section in the manual for adjustment instructions.
Why is my Haier LCD TV showing horizontal bars and picture shaking?
If your Haier LCD TV displays horizontal or vertical bars or the picture is shaking, check for local interference from electrical appliances or power tools.
Why is my Haier LCD TV showing black and white on some channels?
If your Haier LCD TV shows no color for some channel programs (displays in black and white), first check if the same problem occurs on other channels. Then, check the picture and sound system settings. For color adjustments, refer to the relevant instructions in the Manual.
General| Screen Size | 22 inches |
|---|---|
| Resolution | 1366 x 768 |
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| HDMI Ports | 1 |
| USB Ports | 1 |
| Refresh Rate | 60 Hz |
| Inputs | HDMI, USB, RF |
To Next Page
