Operation
20 TV LCD-TFT
1
Also can enter channel number directly,eg:2-0.
.
Note
If skip is ON on one channel, press CH+/- button, the
channel will not appear.
2.
Using CH+/- buttons.
Press CH+ button to select a channel number in
number increasing direction.
Press CH- button to select a channel number in
number decreasing direction.
Select the desired sound
Press VOL-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~100.
When the volume buttons are pressed the volume level
is displayed automatically on the TV screen.
Mute
1. Press MUTE button on the remote control and
icon will display on the screen. At this time, the sound
of the TV set is turned off.
2. If you want to recover the sound, press MUTE
button again or directly press VOL+ button.
Volume
Select the desired program
To Next Page
Loading...
Need help?
General
