EasyManuals Logo

Haier HNSE04 User Manual

Haier HNSE04
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
8
English
1. Remove the top hinge cover.
2. Loosen the top hinge screws using a phillips head screwdriver.
3. Adjust the door or put a spacer in between and then tighten the
screws.
4. Replace the top hinge cover.
Door Alignment
NOTE: As the door gets pressed in during shipping, after reversing
the door, the gasket may have to be reset. This is done to
prevent the cool refrigerated air from escaping. If there is a
gap between the door gasket and the cabinet, set the gasket by
gently pulling it out to seal the gap.

Table of Contents

Other manuals for Haier HNSE04

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Haier HNSE04 and is the answer not in the manual?

Haier HNSE04 Specifications

General IconGeneral
Door hingeRight
Product colorWhite
Reversible doorsYes
Appliance placementFreestanding
Door typeSingle
No Frost systemNo
Total net capacity- L
Total gross capacity113 L
Fridge number of shelves/baskets3
Freezer positionTop-placed
Package weight28000 g
Weight and Dimensions IconWeight and Dimensions
Depth530 mm
Width480 mm
Height850 mm
Weight25000 g

Related product manuals