English
24
Operation and functions
Display
TIMER
SET
BOOST
MODE
BOOST
HW
SET
ACT
STA R T
STOP
VAC
ERROR
ECO
ECO+
AUTO
1
2
HP
HC
!
$
Symbol
Description
Timer adjust:press this key, then Press the + and - to adjust the
time.
Power ON/OFF switch
When turned off, the display shows the time and the actual water
temperature. When turned on, the display shows the working
mode.
The default temperature setting is 55°C in the factory. It can be
adjusted simply by pressing + & - directly on the default display.
Working mode selection:Press the key, the AUTO mode, ECO
mode, ECO+ mode,VAC mode is displayed in turn.
Press SET or wait 6 seconds the mode is selected.
Confirm button
Turn on or off fast heating function：Heat pump and Auxiliary
electrical heater are activated at same time.
Description of the pictograms
To Next Page
Loading...
Need help?
General
