EasyManuals Logo

Haier HP200S1 User Manual

Haier HP200S1
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
The outlet water temperature
of a water heater is typically
higher than the temperature
indicated on the display. Hot
water shall not be pointed at
the human body immediately
after opening the hot water
valve to avoid injury caused by
hot water.
Hands or other items shall not
be put into the air grille to
avoid injury or damage to the
water heater.
Means for disconnection from
the main supply having a
contact separation in all poles
that provide full
disconnection under
overvoltage category III
conditions must be
incorporated in the fixed
wiring in accordance with the
wiring rules.
If the power cord is damaged,
it shall be replaced by
qualified professionals to
avoid hazards.
Install the water heater in
strict accordance with the
installation instruction
specified on page 11-23.
Maintenance shall be carried
out according to the
instructions specified on
page 28.
Safety instructions (to be followed at any time)
English

Other manuals for Haier HP200S1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Haier HP200S1 and is the answer not in the manual?

Haier HP200S1 Specifications

General IconGeneral
BrandHaier
ModelHP200S1
CategoryWater Heater
LanguageEnglish

Related product manuals