0907S005V0
3-2. Thermostat disassembly
1
Use the Cruciform screwdriver to take off the three
screws which fixed the thermostat house.
2.
Pay an attention to cable connection part in disassembly
process, disconnect the cable terminals and then we
could take off the thermostat house.
3
Removed the original thermostat ,take the new
thermostat probe to the zone for Feeling temperature of
the thermostat house
4
Then use the Aluminum foil tape to seal the temperature
probe
5
The connection of the thermostat :C connect to brown
cable, L connect to red cable and green cable connect to
grounding