Do you have a question about the Haier HRF10WND and is the answer not in the manual?
Brand | Haier |
---|---|
Model | HRF10WND |
Category | Refrigerator |
Language | English |
Remove all packaging material, including foam base and adhesive tape, and inspect for damage.
Leveling legs adjust clockwise to raise, counterclockwise to lower. Proper leveling aids door closure.
Ensure proper air circulation for efficiency by maintaining recommended clearances around the unit.
Avoid non-insulated/heated locations and direct sunlight; ensure even surface for proper installation.
Steps to align the freezer door by loosening top hinge screws and adjusting.
Steps to align the refrigerator door by loosening bottom hinge screws and adjusting.
Procedure to dismantle doors and hinges, involving adhesive tape, screws, and careful removal.
Steps to reassemble doors and hinges by aligning pivot pins and tightening screws.
Details adjustable temperature dial, interior light, airflow control, and humidity controls for crispers.
Instructions for removing or adjusting full-width slide-out shelves.
Steps to grip, slide out, and reinsert the crisper drawer.
Instructions on how to carefully grasp and slide out the crisper cover to remove or replace it.
Guidance on storing fresh food, including wrapping, washing, and safe storage times for meats.
Instructions for cleaning the refrigerator interior, exterior, and door gaskets.
How to clean door gaskets regularly and apply petroleum jelly for pliability.
Checks for thermostat, plug connection, and AC outlet power to resolve non-operation.
Identifies causes like frequent openings, recent food additions, gasket seal, or temperature setting.
Guidance on adjusting the temperature control setting to a warmer level.
Normal operation in humid conditions, frequent openings, or gasket/door seal issues.
Covers defects in workmanship/materials for 12 months labor, 12 months parts, 5 years sealed system.
Specifies 90 days labor/parts for commercial/rental use; excludes shipping, misuse, and non-authorized service.
Covers mechanical/electrical parts for 12 months, sealed system components for 5 years, excluding finish/trim.
Repair or replace defective parts free of charge for labor/parts within 12 months.