EasyManua.ls Logo

Haier HRF10WND - Electrical Requirements; Installation Limitations

Haier HRF10WND
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Electrical Requirement
Make sure there is a suitable power outlet (115 volts, 15 amps outlet)
with proper grounding to power the refrigerator.
Avoid the use of three-plug adapters or cutting off the third grounding
in order to accommodate a two-plug outlet. This is a dangerous practice
since it provides no effective grounding for the refrigerator and may
result in shock hazard.
Do not install your refrigerator in any location not properly insulated or
heated, e.g. garage etc. Your refrigerator was not designed to operate
in temperature settings below 55˚ Fahrenheit.
Select a suitable location for the refrigerator on a hard, even
surface away from direct sunlight or heat source, e.g. radiators,
baseboard heaters, cooking appliances etc. Any floor unevenness
should be corrected with the leveling legs located on the front bottom
corners of the refrigerator.
Installation Limitations
6
EnglishEnglish

Table of Contents

Related product manuals