EasyManuals Logo

Haier HRF10WND User Manual

Haier HRF10WND
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
15
1. Switch off power to refrigerator.
2. Remove the highest shelf.
3. Allow light bulb to cool before removing.
4. Pinch the plastic cover between fingers and
thumb and gently pull to the left.
5. Remove the bulb by screwing it counter-clockwise.
6. Always replace with appliance-type light bulb rated at 15 watts
or lesser wattage.
7. Do not exceed the 15 watts rating at any time.
8. To replace cover, insert rear clips in first and gently push front
clip in until the cover snaps into place.
Occasionally there may be power interruptions due to
thunderstorms or other causes. Remove the power cord from AC outlet
when a power outage occurs. When power has been restored, replug
power cord to AC outlet. If outage is for a prolonged period, inspect
and discard spoiled or thawed food in freezer and refrigerator. Clean
refrigerator before reusing.
For long vacations or absences, empty food from refrigerator and
freezer, move the temperature to the OFF position and clean the
refrigerator and door gaskets according to "General cleaning"
section. Prop doors open, so air can circulate inside.When moving
always move the refrigerator vertically. Do not move with the unit lying
down. Possible damage to the sealed system could occur.
Light Bulb Replacement
Power Interruptions
Vacation and Moving Care
EnglishEnglish

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Haier HRF10WND and is the answer not in the manual?

Haier HRF10WND Specifications

General IconGeneral
BrandHaier
ModelHRF10WND
CategoryRefrigerator
LanguageEnglish

Related product manuals