Haier HRF10WND - Door Alignment; Freezer Door Alignment; Refrigerator Door Alignment

Freezer Door: (see fig. # 1)
1. Remove hinge cover screw.
2. Remove the top hinge cover.
3. Loosen the top hinge screws using a Phillips head screwdriver.
4. Adjust the door or put a spacer in between and then tighten the screws.
5. Replace the top hinge cover.
Refrigerator Door: (see fig. # 2)
1. Loosen and remove the bottom hinge using a
Phillips head screwdriver.
2. Adjust the door, or put a spacer in between and
then tighten the screws.
Door Alignment
7
fig. # 1
Hinge box
cover
Top hinge
fig. # 2
lower bracket
lower pivot pin
lower pivot pin hole
bottom hinge pad
EnglishEnglish