To Next PageTo Next Page
Need help?Do you have a question about the Haier HSU-09H03/(BP)1 and is the answer not in the manual?
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Refrigerant | R410A |
| Type | Split |
| Cooling Capacity | 9000 BTU |
| Outdoor Unit Dimensions (W x H x D) | 700 x 544 x 245 mm |
Explains the coding rules for unit models and series.
Details the series brief introduction, including features and standard operating conditions.
Technical specifications for the HSU-09H03/(BP)1 model.
Technical specifications for the HSU-12H03/(BP)1 model.
Performance curves for the SHV130FFDC compressor.
Performance curves for the KHV104FCKA compressor.
Identifies and illustrates indoor unit components.
Identifies and illustrates outdoor unit components.
Provides detailed net dimensions for the indoor unit.
Provides detailed net dimensions for the outdoor unit.
Exploded view of the indoor unit for assembly reference.
List of spare parts for the indoor unit with part numbers.
Continuation of the indoor unit spare parts list.
Exploded view of the outdoor unit for assembly reference.
List of spare parts for the outdoor unit with part numbers.
Continuation of the outdoor unit spare parts list.
Introduction to electrical control functions and status conversion.
Details air volume and compressor control for cooling and dehumidification.
Details air volume, compressor control, and defrosting for heating.
Covers protection mechanisms and abnormality confirmation.
Comprehensive list of error codes and abnormality modes.
Electrical connection diagram for the indoor unit.
Electrical connection diagram for the outdoor unit.
Schematic of the main electronic control circuit.
Specific circuit diagram for the IPM module.
Guide to diagnosing unit abnormalities based on indicator status.
Lists common phenomena and their potential causes or checks.
Illustrates the flow of refrigerant during operation.
Presents noise levels across different frequencies for indoor and outdoor units.
Shows airflow patterns under various conditions and fan speeds.
Manual introduction, necessary tools, and accessory parts for installation.
Guidelines for selecting installation locations and connecting power.
Detailed steps for mounting and installing the indoor unit.
Instructions for connecting pipes, drain hose, and electrical cables for the indoor unit.
Specifics on connecting indoor and outdoor unit cables.
Procedures for installing the outdoor unit and connecting pipes.
Method for purging air and handling refrigerant charge.
Guidelines for pipe cutting, flaring, and drainage installation.
