Emergency operation and test operation
Operation
Emergency Operation:
Use this operation only when the remote controller is defective or lost,and with
When the emergency operation switch is pressed, the " Pi "sound is
heard once, which means the start of this operation.
temperature is below 16
o
C, do not use it in the
Test operation:
Use this switch in the test operation when the room
normal operation.
operation starts with the air flow speed "Hi".
Continue to press the test operation switch for more
than 5 seconds. After you hear the "Pi" sound twice,
release your finger from the switch: the cooling
Removal of the restriction of emergency or test operation:
When the remote controller is manipulated, it gets the system back to the
normal operation mode.
Press the emergency operation switch once more, or manipulate through the
ON/OFF button of remote controller;after you heard the "Pi" sound, the eme-
rgency or test operation will be terminated.
It is impossible to change the settings of temp.and fan
speed,It is also not possible to operate in timer or dry mode.
Test operation switch is the same as emergency switch.
Pi
emergency
operation switch
test operation
switch
Pi
Pi
function of emergency running, air conditoner can run automatically for a while.
When power switch is turning on for the first time and emergency operation starts,
the unit will run automatically in the following modes:
Under this operation mode,the fan motor of indoor
unit will run in high speed.
To Next Page
Loading...
