Why does my Haier Air Conditioner not restart immediately?
If your Haier Air Conditioner doesn't restart immediately after being stopped, this is due to a built-in protection mechanism. To protect the system, there is a 3-minute delay before it can be restarted. If the unit was unplugged and plugged back in, this protection circuit also activates for 3 minutes.
General| Cooling Capacity | 9000 BTU/h |
|---|---|
| Heating Capacity | 9500 BTU/h |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 8 kg |
| Power Consumption (Cooling) | 840 W |
| Net Weight (Indoor Unit) | 8 kg |
| Type | Split Air Conditioner |
| Outdoor Unit Dimensions (L x W x H) | 540 mm |
| Air Flow (High) | 500 m3/h |
| Operating Temperature (Cooling) | 18-43 °C |
Explains the function and display of each button on the air conditioner's remote control.
Instructions on using the remote control, including battery installation and power failure handling.
Instructions for operating the unit in COOL, HEAT, and DRY modes, including temperature and fan speed settings.
Guides on setting the timer for automatic unit start and stop operations.
Diagnoses common operational phenomena like noise, smells, or mist and identifies potential causes.
Troubleshooting steps for issues like unit not working or poor cooling performance.
To Next Page
