EN
Installation
3. Undo the screws holding the upper 
hinge in position and then remove the 
hinge(Fig.13). 
4. Lift the door to remove it (Fig.14). 
When removing the freezer door, Iift 
it high enough to pull out the water 
connection from the bottom of the 
appliance. 
5. Ret the door by reversing the re-
moval steps. Ensure that the grounding 
cable will be xed by the screw. 
6. Ret the water connection . 
 NOTICE:Fridge door 
The pictures show the removing of the freezer compartment door . For the fridge 
door please use the corresponding parts on the other side .
40