Water dispenser
With the water dispenser cool drinking water can be tapped.
The water tank should be cleaned before rst use (see CARE AND CLEANING).
WARNING!
Use drinking water only.
1. Ensure that the water tank is properly inserted
(see EQUIPMENT)
2. Rotate and lift the round lid (A) and ll the water
tank up with fresh drinking water.
3. Fill water only up to the mark (1,8 l); as it could
overow when the door opens and closes.
4. Close the round lid until it clicks into place.
Notice
▶ Before relling dispose residual water and clean the water tank.
▶ When you don‘t need water for a long time, please empty the water tank and insert
the cleaned tank.
▶ The cover (C) on the water tank is additionally used to save energy. If you do not want
to get water from the water dispenser for a long period, please still install the cover
because of better insulating and saving energy.
Filling the water tank
Getting water from the dispenser
1. Place a glass underneath the water outlet.
2. Push it gently against the water dispenser lever
with your glass.
Make sure the glass is in line with the dispenser to
prevent the water from splashing out.
To Next Page
Loading...
