Electrical Requirement
• Make sure there is a suitable power Outlet (I 15 volts, 15 amps outlet)
with proper grounding to power the wine cooler.
• Avoidthe useof three pbg adaptersor cutting offthe thirdgroundingin
order to accommodatea _woplugoul_et.Thisisa dangerouspractice
sinceit providesno effectivegroundingforthewine coolerand may
resultin shockhazard,
Install Limitations
• Do not install your wine cooler in any location not properly insulated or
heated e.g. garage etc. Your wine cooler was not designed to operate
in temperature settingsbelow 55" Fahrenheit.
• Select a suitable location for the wine cooler on a hard even
surface away from direct sunlightor heat sourcee.g. radiators,
baseboard heaters, cooking appliances etc. Any floor unevenness
shouldbe corrected with the levering bgs located on the front and rear
bottom corners of the wine cooler.
• Your wine cooler isdesigned for flee-standing installationonly. It isnot
designed for built-in application.
To Next Page
Loading...
