18
.lennosrep ecnanetniam eht tcatnoC rorrE rotoM 7rrE
Err8 Water exceeds protec ve level. Contact the maintenance personnel.
UNb
End
1:25 The remaining me is 1 hour 25 minutes.
19:30
¬Status inform
on: Preset me for delayed opera on.
Control panel lock fun on: Press the "Delay" and the "Start/Pause" bu ons simultaneously
for 3 seconds a
er g a program. It can no longer be changed by op g bu ons or
knobs. To unlock press the "Delay" and "Start/Pause" bu
ons again for 3 seconds.
Power-off memory fun on: In case of abrupt power failure or the need to cut off the power
during a program cycle, the present se
ngs will be saved and the preset opera on will
resume when the power is on again.
To cancel a program. Press the "Start/Pause" bu on, then switch off the power and the
program is autom
ly cancelled. Turn the program selector again to choose another
program.
During the spin process, if too much foam is inspected, in order to protect the motor, the
washing machine will eliminate the foam automa
y; the motor will stop and the drain
pump will drain the water. If it happens more than
end of step without spinning.
Maintenance
End of wash cycle.
A
er the last rinsing cycle finishes, spinning fails completely due to unbalance of the
laundry.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
