Why does my laundry have grey patches after washing in my Haier HWD100-BP14636?
If laundry has grey patches after washing in your Haier Washer/Dryer, pretreat the laundry with a special cleaner to remove fats such as oils, creams, or ointments.
How to reduce excessive foam in my Haier HWD100-BP14636?
If excessive foam is present in your Haier Washer/Dryer, check detergent recommendations and reduce the amount of detergent used.
How to remove washing powder residues from laundry in my Haier HWD100-BP14636?
If washing powder residues are on the laundry after using your Haier Washer/Dryer, perform an extra rinse. Try to brush the points from the dry laundry or choose another detergent.
Why is my Haier HWD100-BP14636 Washer/Dryer not filling with water?
Your Haier Washer/Dryer might not be filling with water due to several reasons. First, check if the water tap is open and working. Also, inspect the inlet hose for any kinks that might be blocking the water flow. The inlet hose filter could also be blocked, so try unblocking it. Low water pressure (less than 0.03 MPa) can also be the cause, so verify the water pressure. Ensure that the door is properly closed and that there is no water supply failure.
What to do if my Haier HWD100-BP14636 fails to operate?
If your Haier Washer/Dryer isn't operating, start by ensuring the programme has been correctly selected and started. Check that the door is fully closed. Make sure the machine is switched on and that there is no power failure by checking the power supply. Finally, verify whether the child lock is activated and, if so, deactivate it.
How to fix a drainage failure in my Haier HWD100-BP14636?
If your Haier Washer/Dryer is experiencing drainage failure, unblock the drain hose and clean the pump filter. Also, make sure the drain hose is properly installed.
Why are there washing powder residues on the laundry from my Haier HWD100-BP14636 Washer/Dryer?
If you find washing powder residues on your laundry after using your Haier Washer/Dryer, it may be due to insoluble particles of detergent. Try performing an extra rinse. You can also try to brush the points from the dry laundry or choose another detergent.
Why does my Haier Washer/Dryer leave grey patches on laundry?
If your Haier Washer/Dryer leaves grey patches on the laundry, it is likely caused by fats such as oils, creams, or ointments. Pretreat the laundry with a special cleaner.
Why does my Haier Washer/Dryer have excessive foam?
Excessive foam in your Haier Washer/Dryer may be due to using an inappropriate detergent. Check detergent recommendations and reduce the amount of detergent used.
Why is my Haier Washer/Dryer spinning failing?
Spinning may fail in your Haier Washer/Dryer due to an unbalance of laundry. To resolve this, check the machine load and laundry distribution, then run a spinning programme again.
Checks and handling before initial operation, including transport bolts and packaging.
Guidelines for safe operation during everyday use, including supervision and material handling.
Requirements for safe placement and electrical connection during installation.
Using the programme knob and understanding the display information.
Adjusting washing temperature and spin speed using dedicated buttons.
Utilizing 'Intense' for tough stains and '6+6kg' for combined wash/dry cycles.
Details on Cotton, Synthetic, Mix, Wool, Underwear, Sport, Jeans, Hygienic programmes.
Details on Fast, Express, Daily Wash, Baby Care, Delicate/Silk, Hand Wash programmes.
Information on dedicated drying and spinning cycles.
Guidance on using the care chart, loading the appliance, and drying tips.
Recommendations for choosing and adding detergents based on programme and fabric type.
How to switch on, select programmes, use functions, and manage cycles.
Tips for saving energy, water, and detergent during washing.
Maintenance of the water inlet valve and cleaning the filter to prevent blockages.
Identifies problems indicated by error codes (F3, F4, F7, F9, FA, FCI, FC2, Fd, FE, Unb) and their solutions.
Addresses vibration, stops, foam, washing results, residue, and grey patches.
Guidelines for safely connecting the appliance to the power supply.
Checks and handling before initial operation, including transport bolts and packaging.
Guidelines for safe operation during everyday use, including supervision and material handling.
Requirements for safe placement and electrical connection during installation.
Using the programme knob and understanding the display information.
Adjusting washing temperature and spin speed using dedicated buttons.
Utilizing 'Intense' for tough stains and '6+6kg' for combined wash/dry cycles.
Details on Cotton, Synthetic, Mix, Wool, Underwear, Sport, Jeans, Hygienic programmes.
Details on Fast, Express, Daily Wash, Baby Care, Delicate/Silk, Hand Wash programmes.
Information on dedicated drying and spinning cycles.
Guidance on using the care chart, loading the appliance, and drying tips.
Recommendations for choosing and adding detergents based on programme and fabric type.
How to switch on, select programmes, use functions, and manage cycles.
Tips for saving energy, water, and detergent during washing.
Maintenance of the water inlet valve and cleaning the filter to prevent blockages.
Identifies problems indicated by error codes (F3, F4, F7, F9, FA, FCI, FC2, Fd, FE, Unb) and their solutions.
Addresses vibration, stops, foam, washing results, residue, and grey patches.
Guidelines for safely connecting the appliance to the power supply.
General| Washer Type | Front Load |
|---|---|
| Loading Type | Front Loading |
| Washing Capacity | 10 kg |
| Drying Capacity | 6 kg |
| Maximum Spin Speed | 1400 RPM |
| Spin Speed | 1400 RPM |
| Energy Efficiency Class | A |
| Color | White |
| Product Type | Washer/Dryer |
| Programs | Cotton, Synthetic, Delicate, Wool, Drying, Rinse |
To Next Page