°h
Beforeyou install your air conditioner check the fallowing:
The unitis free of aHobstructions inside and outside the room e.g. drapes,
curtains, furniture, pRants,shrubs, bushes,trees, other structuresRikebuilding,
garage etc.Air conditioner must have dear unobstructed airflow through the
condenserto remove the heal
2) The window is strong enough to hold the weight of the air conditioner.
Extra brackets or supports may be needed depending on your windows.
(Bracketsor Supports not provided in air modds/
3) The window siJJand track are strong enough to hold the weight of the
air conditioner.
4) ThewaJJis strong enough to hdd the unit. Extra brackets or supports may be
needed depending on thewall (Bracketsor Supports not provided in dJ modds).
5}
A 7)
Asl
Ag)
There is adequate and proper power suppJynear the air condifionen
DO NOT useadapter pJugs.
DO NOT useextension cords.
DO NOT cut or removethe ground prong_
DO NOT modify the pJugor the dectrkaJ waJJoutJetin any way.
if pJugdoes not fit the eJectricaloutJethavea certified dectrician do the
necessarychange.
A10) DO NOT connectelectrical power to the unit before installation.
_11) DO NOT use if power cord is worn out, frayed or otherwise damaged.
Avoid using if there are cracks or abrasion damage along the Jength,
pJugor connecfiom
] 2) DO NOT instaJJinto any existing cabinet or sleevewhich does not have side
and top air vents, g
To Next Page
Loading...
Need help?
General
