EN
Maintenance
Òñö÷äïïä÷ìòñçòòõêäöîè÷äé÷èõæïèäñìñê
Before installation, make sure that there is no water on the door
gasket. Insert the door gasket into the groove , and press the door
gasket tightly from the top to the bottom by hand until the whole
door gasket is inserted into the groove.
Ìïèäñìñê÷ëèöëèïùèö
All shelves can be taken out for cleaning.
Take out all bottles.
Lift each shelf a little and take it out.
Clean the shelf with a soft towel.
Wait until the shelves are dry before putting them back in.
!"
To Next Page
Loading...
