Haier HYC-509 - Cautions for Usage

45
Cautions for Usage
• When restarting the refrigerator after it is unused for a long time, the battery may be running low.
Make sure that the battery switch is in the “ON” position to charge the battery. The battery can be fully
charged in about two days.
• Before placing the goods into the refrigerator, make sure that the temperature inside the
refrigeratorhas reached the set temperature and then put them in batches. Do not put items which
volume larger than 1/3 of the refrigerator volume each time, so as to avoid rapid temperature rise.
• The displayed temperature of the refrigerator is the temperature where the sensor located. Although
the displayed temperature sometimes di󰀨ers from the actual temperature at center of the refrigerator,
it will gradually reach the actual temperature.
• Clean the refrigerator with diluted neutral detergent. Do not use brushes, acids, gasoline, soap
powder, polishing powder or hot water to clean the refrigerator, as these materials may damage
painted surfaces and plastic and rubber parts. Be aware that do not use volatile solvents such as
gasoline to wipe plastic and rubber parts.
•Disconnect the power supply plug and also turn o󰀨 the battery switch when the unit is not used for
long periods.
•Every time when input or pickout items, please minimize the time of door opening, so as to avoid
large uctuations of temperature and humidity inside the refrigerator.
• After opening the door, the chamber temperature will rise sharply for a short time, this phenomenon
is normal; and the temperature will generally recover within 1 hour after closing the door.
• The ambient temperature for application of this product is 16~32°C, and the humidity shall be below
85%. In high temperature and high humidity environment, the glass door may have condensation,
which is normal and will not affect the storage temperature inside the refrigerator. Under such
circumstances, please improve the ventilation condition as soon as possible and reduce the ambient
temperature.
• The basic functions of the medical refrigerator include: refrigeration function inside the refrigerator
if the refrigeration system operates normally; data record transmission function if the data recording
system (if any) operates normally; and corresponding functions if the electronic lock (if any) operates
normally;In the alarm state, there shall be buzzing / or lamp flickering and / or text display on the
screen
• Disposal of unit
Waste Electirlcal and Electronic Equipment (WEEE) Directive-2002/96/EC
This symbol means that electrical and electronic equipment, at their end-of -life, should be disposed
of separately from your household waste.
Please dispose of this equipment at your local community waste cleection/recycling centre.
In the European Union there are separate collection systems for used electrical and electronic
products.
Please help us to conserve the environment we live in!