U disk data time parameter setting
After unlocking, press setting, digit switch, temperature adjustment keys for more than 5s, the first
two digits on refrigerating display screen shows 1P stably, frozen display screen will blinking display
year (10 by default), and the year will increase by 1 for each press of temperature adjustment key,
with circle display from 10 to 30, after setting press setting key to save, then the front two digits on
refrigerating display screen shows 2P stably, frozen display screen will blinking display month
(01 by default).
The month will increase by 1 for each press of temperature adjustment key, with circle display from
01 to 12, after setting press setting key to save, then the front two digits on refrigerating display
screen shows 3P stably, frozen display screen will blinking display date (01 by default); the date will
increase by 1day for each press of temperature adjustment key, with circle display from 01 to 31,
after setting press setting key to save, then the front two digits on refrigerating display screen shows
4P stably, frozen display screen will blinking display month (01 by default);the time will increase by
1h for each press of temperature adjustment key, with circle display from 00 to 23, after setting press
setting key to save, then the front two digits on refrigerating display screen shows 5P stably, frozen
display screen will blinking display month (01 by default); the time will increase by 1min for each
press of temperature adjustment key, with circle display from 00 to 59, after setting press setting key
to save, and it will automatically exit if there is no key operation for 10s after setting.
13
16
HYCD-282
HYCD-282A
Control Panel
To Next Page
Loading...
