Haier Jade - Advanced Operation Features

Operation
Unit will start running to reach the
temp. setting on LCD.
AN Operation
changes as follows:
Unit will run at selected fan speed.
button.
pressed, temp. setting
increases 0.5 ºC.
pressed, temp. setting
decreases 0.5ºC.
1
2
PURIFY
SELF
CLEAN
ECO SENSOR
ECO SENSOR
ECO SENSOR
SELF
CLEAN
PURIFY
1
ECO SENSOR Operation
Press ECO SENSOR button,For each press,changes
as follows:
cancel
A human sensor is used to detect changes in the infrared radiationemitted by
human bodies. In case of the following conditions, the detection may not be
accurate:
temperature
objects due to the wind.
sharply.
Besides, if a person is at the border of two or three air blowing areas, the
automatically.
NOTE :
The speed of human movement exceeds the sensitivity of the sensor.
Moving targets go beyond the detection range of the sensor.